Easy Installation

//Easy Installation
Easy Installation 2017-12-15T02:50:34+00:00

Mounted on the Clean Side of the Conveyor

belt-tracker-on-dirty-side-of-beltThe SURE ALIGN TRACKER has a multi pivot design which uses a mechanical advantage to shift the guide roller and move the steering roller with minimum force to its correct position. Because the guide rollers are set approx. ¼ ` from the belt edge they can since smaller movements of the belt and make correction after very slight misalignments.

Rather than waiting for a powerful mistracking force, the multi pivot design adjusts constantly reacting to small mistracking forces, providing continuous precise corrections of the steering roller.

3-d-typical-install-1With the installation on the inside (clean side) of the conveyor belt, the rubber lagged steering roller maintains proper tension and positive contact between the roller and the conveyor belt. No fugitive material will cause seizure or failure to the steering roller. The range of motion and seizure of the pivoting bearings is not effected do to the installation. Unlike most training rollers on the market, the Sure Align Tracker is one of the few who will guarantee the steering roller will always be in the proper position to steer the belt back to its centered position. The Sure Align Tracker is a patent proven training roller. With its unique design, this training roller will continually correct belt misalignment and provide a reliable conveyor belt system.

Easy Installation

Installation involves the removal of an existing roller and replacing the roller with the Sure Align Tracker. The Sure Align Tracker uses existing mounting brackets on the conveyor belt frame. No special tools are needed.

The pivoting members are installed into the mounting bracket, followed by the steering roller than the cross-link assembly. Then simply install the guide roller into cross-link assembly.

Download the Sure Align Tracker Installation Manual